THAI PLASTIC INDUSTRIAL (1994) PUBLIC COMPANY LIMITEDSET: TPLAS🇹🇭 TH

Business Operation · 2025

Corporate Information

Company Name

THAI PLASTIC INDUSTRIAL (1994) PUBLIC COMPANY LIMITED

Telephone

0-2191-8288-9

Website

http://www.tpic.co.th

Email

Information@tpic.co

Dividend Policy

Dividend Policy

The Company has policy to pay dividend not less than 30 percent of its net profit after deduction of tax and legal reserves and other reserves (if any) on an annual basis. The Company will consider the dividend payment by various factors in order to maximize the benefits of the shareholders and the dividend payment does not have an adverse effect on corporate operations significantly. However, such dividend payment may be changed depending on operating results, financial position, liquidity, necessary to use working capital in business operations, investment plan, business expansion plan in the future, market conditions, appropriateness and other factors relating to operations and management of the Company, provided that the Company must have sufficient cash for business operation and such operation will cause the highest benefits to shareholders as deemed appropriate by the board of directors and/or shareholders of the Company. The resolution for dividend payout approval passed by the Board of directors must be proposed for an approval at the shareholders meeting, unless it is an interim dividend payout where the Board of Directors is authorized to approve and such dividend payment shall be reported to the shareholders at the next meeting of shareholders. However, the dividend payout shall not be paid other than out of profits. In the case where the Company still has an accumulated loss, no dividends shall be paid. Unless otherwise provided by the Articles of Association regarding preferred stocks, dividends shall be paid according to the number of shares, with each share receiving an equal amount and payment of dividends shall be approved by the meeting of shareholders.


For the year 2026, the Board of Directors resolved to propose to the Annual General Meeting of Shareholders on April 9, 2026 to approve the annual dividend payment at the rate of 0.040 Baht per share or equivalent to 135.80% of net profit after income tax deduction.

Historical Dividend Payments

This YearLast Year2 Years Ago3 Years Ago4 Years AgoMetricDescription
0.030.040.050.110.13Net profit per share (Baht : Share)Net profit per share (baht : share)
0.040.040.040.10.1Dividend per share (Baht : Share)Dividend per share (baht : share)
00000Dividend stock ratio (Number of original shares: dividend shares)Ratio of stock dividend payment (existing share : stock dividend)
00000Dividend share value per share (Baht : Share)Value of stock dividend per share (baht : share)
0.040.040.040.10.1Total dividend payment value (Baht : Share)Total dividend payment (baht : share)
135.892.4785.891.1779.62Dividend payout ratio to net profit (%)Dividend payout ratio compared to net profit (%)

Major Shareholders

Major Shareholders

No.NameShares% Shares
17,813Family (1) Mrs. Phoonsin Teerarujinon (2) Mr. Apirat Teerarujinon (3) Ms. Poranee Teerarujinon (4) Mr. Poosana Teerarujinon160,165,00059.32
17,817Mrs. Donnapa Jiamkanok8,050,0002.98
17,818MRS. SRISUMON TANGNOI8,050,0002.98
17,819Mrs. Phen Teerarujinon8,000,0002.96
17,820Mrs. Phatcharee Chatkaewboriboon8,050,0002.98
17,821MR. BANCHA THIANSOONTORN4,461,6001.65
17,822MR. TANAKARN DAMRONGRAT2,757,8001.02
17,823MR. CHUKIAT PUTTHANUNTADEJ1,783,0000.66
17,824MR. PRATAK SUMONGKOLTHANAKUL1,736,0000.64
17,825Mr. Anan Meesat1,384,0000.51

Business Strategies Overview

Chairman's Message

In the year 2025, the Thai economy faced various challenges, including geopolitical issues, the adjustment of import tariffs by the United States, and high household debt, which pressured domestic purchasing power to slow down. Furthermore, the uncertainty of the global economy and politics was another significant factor contributing to the continuous high volatility of global oil prices. This led the petrochemical industry, which is upstream in the plastic product supply chain, to confront uncertainties in both supply and product prices. This consequently affected the plastic packaging industry in the form of supply and price uncertainties. These factors have intensified domestic competition.

Nevertheless, the Company has maintained its performance level close to that of the previous year. even though facing situations that are not continuously certain, following the improvement of operational strategies, resulting in pushing new products into the market, and the effectively uniting the efforts of personnel to move in the same direction. I, as the Chairman of the Company's Board of Directors, request that a commitment to oversee and develop the company for sustainable growth, caring for the environment, and having collective in economic development. and Thai society going forward.

Vision

Cost-effective packaging for better well-being

Objectives

-

Goals

Target 1: Revenue growth

Target 2: Increase product diversity

Target 3: Enhance production efficiency and supply chain management

Business Strategies

  1. Market Expansion and Revenue Growth Strategy

The company focuses on market expansion and revenue growth by developing new products to meet evolving demands, emphasizing the creation of competitive advantages in cost and service through developing production capacity to achieve economies of scale ( economies of scale) and continuous development focused on production and management efficiency. Furthermore, the company has adjusted its business model by incorporating buy-and-sell (Trading) and original equipment manufacturing (OEM) models for other popular products in the packaging market. This strategy emphasizes distributing products in high-demand markets, particularly in the domestic market and industrial customer segments, to diversify revenue streams and strengthen business stability.

  1. Product Development and Innovation Strategy

The company prioritizes continuous product development and innovation to create diversity and respond to ever-changing market demands. Research and development of new products will focus on innovative and environmentally friendly products, utilizing modern technology and high-quality materials. Furthermore, emphasis is placed on designing products that are user-friendly and meet the needs of consumers in the digital age. The company will collaborate with research institutions, universities, and business partners to exchange knowledge and develop new innovations in packaging production. Additionally, it encourages personnel to participate in inventing and developing innovations by fostering an organizational culture that promotes creativity and innovation in product development. The company will employ an efficient research and development process, emphasizing the use of customer data and feedback in product development to ensure that the resulting products best meet customer needs and can compete effectively in the market.

  1. Production Efficiency and Supply Chain Management Strategy

The company focuses on maximizing production efficiency and supply chain management agility and effectiveness by utilizing modern technologies such as Automation and IoT (Internet of Things) to enhance precision and reduce production costs. The use of automation also helps minimize errors and increase production speed, enabling timely responses to market demands. The company prioritizes efficient supply chain management by employing a Digital Supply Chain system to increase transparency and reduce delivery times. Furthermore, emphasis is placed on sourcing raw materials from reliable and environmentally friendly sources to mitigate risks and foster sustainability in the production process. Additionally, the company has adopted Lean Manufacturing and Circular Economy principles to reduce waste from production processes and efficiently utilize resources, which not only helps lower production costs but also reduces environmental impact.

Material Changes & Developments

Material Changes & Developments

YearDescription
2,024

Manufacture and distribute new products.

• Cooler bags (LLDPE)

• Premium handle bags, 0.5 kg capacity (PP)

Installed lunch box production machinery with a total production capacity of 2 million units/year.

Installed paper packaging printing machinery with a total production capacity of 5 million pieces/year.

2,023

Installed 1 additional plastic bag cutting machine, with a total plastic bag production capacity of 10,000 tons/year.

2,022

Installed additional machinery for food packaging paper cup production, with a total production capacity of 1.6 million units/month.

2,025
  • The company implements the Lean Energy project to enhance energy efficiency, reduce waste in the production process, and improve operational standards for continuous energy consumption control.

  • Distributes plastic tube products under the Makruk brand.

  • Machine installation

    • Additional cup production machine Total production capacity of 59 million pieces/year.

    • Cutter with additional handle pump Total production capacity of 10,000 tons/year.

Use of Proceeds from Securities Offerings

Is There Money Raised from a Securities Offering Still to Report On?

No

Commitments Made in the Registration Statement

Are There Commitments or Conditions from an Offering or Listing?

No

Group Operating-Structure Policy

Description

The Company has no shares of other companies.

Shareholders with Potential Conflict of Interest

Has Potential-Conflict Shareholder (Y/N)

No

Relationships Among Major Shareholders

Relationship Exists (Y/N)

Yes

Description

Thai Food Industry (1964) Company Limited registered capital: 125,000,000 Baht Nature of business Food and seasoning products in pouch packaging does not operate in business related to the plastic industry. In the present and the near future, there is no policy for operations relating to Thai Food Industry (1964) Company Limited’s operation, except for the normal business transaction (details available for further studies in “Related Party Transaction” topic). Therefore, there is no issue on the conflict of interest.

Shareholders' Agreement

Agreement Exists (Y/N)

No

Shareholding Diagram (Group Structure)

Does the company hold shares in other companies?

No

Income Structure

Product / Service Income

CategoryDescriptionThis YearThis Year %Last YearLast Year %2 Years Ago2 Years Ago %
Total revenue from operationsTotal revenue from operations455,852.05100493,312.95100520,343.79100
Food packaging bag (PP)206,007.2145.19229,350.6546.49253,760.2148.77
Food packaging bags and handles (HDPE)151,875.2833.32167,990.4434.05175,359.8633.7
Food wrap film44,875.999.8445,937.479.3149,518.599.52
Paper packaging30,264.476.6434,497.916.9932,267.496.2
Other Income4,579.3815,796.481.183,216.050.62
Carrier bag (LL)13,068.12.879,299.261.896,221.591.2
Food packaging bags (PE)3,563.270.78440.750.0900
OtherOthers1,618.350.360000

Export Income

CategoryDescriptionThis YearThis Year %Last YearLast Year %2 Years Ago2 Years Ago %
Total revenueTotal revenue455,852.05100493,312.95100520,343.79100
DomesticDomestic455,852.05100493,312.95100520,343.79100
InternationalInternational000000

Other Income

Operating Other IncomeNon-Operating Other IncomeShare of Profit
1710 · As of year: 4579.38 · Description: Total other income · As of yesteryear: 5796.48 · As of year before yesteryear: 3216.06 · 1711 · As of year: 0.0 · Description: Other income from operations · As of yesteryear: 0.0 · As of year before yesteryear: 0.01712 · As of year: 4579.38 · Description: Other income not from operations · As of yesteryear: 5796.48 · As of year before yesteryear: 3216.061713 · Description: Share of profit

Product / Service Characteristics

Business Type

3114

Business Groups

Business GroupDescription
Polypropylene Type Food Packaging Bags: Polypropylene (PP)

Food packaging bags made from polypropylene (PP), commonly known as "clear hot bags," are products with high transparency, allowing contents or food inside to be clearly visible. This makes them suitable for applications requiring aesthetic appeal and showcasing the appetizing nature of food. Furthermore, clear hot bags possess heat resistance up to 100 degrees Celsius without deforming, tearing, or melting, enabling safe packaging of high-temperature food. With excellent fat barrier properties, PP clear hot bags are therefore suitable for packaging greasy or oily foods without degrading the bag. Additionally, clear hot bags can withstand cold temperatures to a certain extent. However, if the bags are exposed to excessive cold, they may become brittle and easily tear.


The company manufactures and distributes PP clear hot bags with a thickness of 0.7 millimeters, which is a popular and standard thickness in the industry. A wide range of sizes is available to meet diverse customer requirements, from the smallest size, 3 inches wide by 5 inches long, up to the largest size, 24 inches wide by 42 inches long, to accommodate various applications. For instance, the 3-inch wide by 5-inch long size is commonly used for packaging condiments such as chili or fish sauce, while the 6-inch wide by 9-inch long size is frequently used for packaging wrapped foods like noodles or noodle soup. With outstanding properties in transparency and heat resistance, PP clear hot bags are an excellent choice for food packaging requiring high safety and quality, while also perfectly enhancing the positive image of customers' products.

Food packaging plastic bags and high-density polyethylene carrier bags: High Density Polyethylene (HDPE)

Food packaging bags made from High-Density Polyethylene (HDPE), commonly known as "translucent bags," are characterized by their milky white and translucent appearance, which allows some light to pass through, making the contents partially visible, but not as clearly as transparent bags made from Polypropylene (PP). Due to these properties, translucent bags are suitable for applications requiring a certain level of privacy, while still allowing the product inside to be seen.


The Company manufactures and distributes HDPE translucent bags in various sizes to meet diverse customer needs. Sizes range from 5 inches wide by 8 inches long up to 20 inches wide by 30 inches long, suitable for a wide range of packaging applications. For instance, smaller sizes such as 5 inches wide by 8 inches long or 5 inches wide by 9 inches long are often used for packaging soy milk or other beverages. The Company's HDPE translucent bags can withstand temperatures up to 60 degrees Celsius without deforming, tearing, or melting, making them suitable for hot food packaging. They also exhibit good cold resistance and can be frozen without becoming brittle or easily breaking. However, to maintain the quality of the bags for long-term use, prolonged storage in high or low temperatures should be avoided. Regarding grease resistance, HDPE offers a certain level of protection, although not as effective as plastic bags made from Polypropylene (PP).


Furthermore, the Company also manufactures and distributes HDPE carrier bags in various sizes to accommodate different applications. They are packaged in packs of 100 bags and range in size from 6 inches wide by 11 inches long to 12 inches wide by 20 inches long. This includes 0.5 kg carrier bags, with sizes ranging from 6 inches wide by 11 inches long up to 12 inches wide by 26 inches long, to comprehensively meet diverse packaging needs. With high production standards and reliable quality, the Company is committed to continuously developing its HDPE translucent bags and HDPE carrier bags to meet the ever-changing demands in the food and consumer goods packaging market.

Cold Plastic Bags, Linear Low Density Polyethylene Type: Linear Low Density Polyethylene (LLDPE)

Food packaging bags made from Linear Low-Density Polyethylene (LLDPE) plastic possess outstanding clarity and gloss, allowing the contents to be clearly visible. Furthermore, they are flexible and durable, not easily broken, which makes them convenient to use and highly adaptable to the shape of the packaged goods.


Furthermore, LLDPE possesses a wide temperature resistance range, from a cold -40C to a high heat of 121C. This makes it suitable for use in food packaging requiring sterility and effectively maintaining the freshness of food. The "Makruk" brand PE freezer bags are made from high-quality polyethylene, offering excellent clarity, toughness, and superior resistance to tearing and leakage. They are ideal for vegetable shops, fresh pork and meat vendors, and farmers requiring packaging for freezing. Available in sizes ranging from 6 inches wide by 11 inches long to 12 inches wide by 20 inches long, and 0.5 kg handle bags in various sizes to accommodate different uses. The "Makruk" brand LL handle bags are designed to beautifully showcase products inside, thanks to their clarity and gloss. They are suitable for bakeries and fruit shops, offering high flexibility and durability, resistance to tearing, and excellent weight-bearing capacity. Available in sizes from 6 inches wide by 11 inches long to 12 inches wide by 26 inches long, meeting all packaging needs that prioritize aesthetics and quality. Under the "Makruk" brand, both PE freezer bags and LL handle bags are designed and manufactured to high-quality standards for cleanliness, safety, and durability, while also perfectly enhancing the positive image of customers' products.

Vow Wrap Food Cling Film: Polyvinyl Chloride (PVC) Type

Stretch film for food packaging is utilized for food preservation. It is manufactured from Olefin family plastics, specifically Polyvinyl Chloride (PVC). The particular type of plastic employed by the company in its manufacturing process is suitable for direct food contact and is non-toxic to the human body, provided it undergoes correct storage and production procedures. If this plastic were produced solely from Polyvinyl Chloride (PVC), its physical and chemical characteristics would be unsuitable for food preservation applications. Consequently, during the production of stretch film for food packaging, additives are incorporated to optimize the raw material for its intended use and to adjust its physical and chemical properties, ensuring its suitability for food preservation and its non-hazardous nature to the body. This process renders the properties of Polyvinyl Chloride (PVC) appropriate for food preservation applications.


The physical characteristics of the food packaging stretch film (PVC Cling Film) include transparency and moderate tensile strength without tearing (particularly along the direction of molecular alignment). The Polyvinyl Chloride (PVC) plastic chosen by the company has obtained safety standard certification from the Food and Drug Administration (FDA) of the United States, affirming its safety and non-toxicity to the human body when manufactured and utilized correctly. The company's food packaging stretch film products have also received certification from the Ministry of Industry (TIS) standard No. 1136-2536. The company manufactures and distributes food packaging stretch film products in a variety of sizes to cater to the distinct application requirements of various customer types.

Paper packaging “BEAT BOX”

Paper Food Boxes are manufactured from bamboo pulp paper coated with Polyethylene (PE), which is an environmentally friendly and consumer-safe material. They can contain food with water and oil components without grease penetration, unlike conventional paper. Furthermore, they can withstand high temperatures up to 100 degrees Celsius, maintaining their original shape, not melting, and remaining free from contaminants. This ensures confidence in the safety and quality of food packaging.


The company manufactures and distributes paper food boxes with a thickness of 260 gsm, available in two main sizes: 130 x 174 x 56 millimeters or 600 milliliters (size M), and 140 x 183 x 57 millimeters or 725 milliliters (size L). Both sizes of paper boxes are popular among consumers for packaging single-serving meals or ready-to-eat prepared foods, offering convenience and preserving the food's taste and freshness. The company has also further developed products under the Beat Box brand, introducing paper food cups with a thickness of 230 gsm to support diverse applications, available in two sizes: 260 milliliters (size S) and 850 milliliters (size L). Beat Box products are designed to enhance convenience in food packaging, while also meeting the diverse needs of consumers who prioritize quality and safety. They represent an excellent choice for food businesses seeking standardized and environmentally friendly packaging.

Research & Development

Has R&D Policy (Y/N)

No

R&D Cost — Label

Research and development (R&D) expenses over the past 3 years (Million Baht)

R&D Cost — This Year

0.0

R&D Cost — Last Year

0.0

R&D Cost — 2 Years Ago

0.0

Assets Used in the Business

Permanent Assets — Description

The Company possesses assets utilized for business operations as of December 31, 2025, categorized as follows:

  • Land and Buildings Used for Business Operations: The Company holds 2 plots of land with a total area of 11 rai, 2 ngan, and 24.8 square wah. These land plots are the location of two permanent single-story buildings with areas of 2,520 square meters and 5,183 square meters, respectively, used as an office building and a production factory, with both buildings being adjoined. There is also one permanent two-story building with an area of 1,200 square meters, used as an office building, and one permanent four-story building used as a production factory with an area of 3,928 square meters, located at 53/1 Moo 4, Kanchanaphisek Road, Tambon Bang Mae Nang, Amphoe Bang Yai, Nonthaburi Province. Furthermore, within this area, the Company has two residential buildings for employees: one permanent four-story building with an area of 1,874 square meters, and one permanent three-story building with an area of 1,398 square meters.

  • Machinery and Equipment: The Company possesses 381 units of machinery and equipment, categorized as follows: machinery and equipment for plastic bag blowing with a total production capacity of approximately 14,000 tons per year; machinery and equipment for plastic bag cutting with a total production capacity of approximately 10,000 tons per year; machinery and equipment for producing stretch film for food packaging with a total production capacity of approximately 1,000 tons per year; machinery and equipment for producing paper food boxes with a total production capacity of approximately 32,000,000 pieces per year; and machinery and equipment for producing paper food bowls with a total production capacity of approximately 24,000,000 pieces per year.

  • Vehicles: The Company owns 5 vehicles, comprising 3 vehicles used for business operations (a van, a pickup truck, and a box truck), all of which are unencumbered. Additionally, there are 2 passenger cars used for business operations, one of which is under a hire-purchase agreement with a leasing company, and the other is unencumbered.

Permanent Assets — Appraisal

AssetOwnershipObligationAppraisal ValueDescription
Land and Land ImprovementsTo hold ownershipMortgaged to secure debt repayment with Kasikornbank Public Company Limited.19,292,765
1. Title Deed No. 99181, Bang Mae Nang Sub-district, Bang Yai District, Nonthaburi Province, Area 10 Rai 2 Ngan 59.9 Tarang Wah 2. Title Deed No. 99182, Bang Mae Nang Sub-district, Bang Yai District, Nonthaburi Province, Area 3 Ngan 64.9 Tarang Wah 3. Land Improvements
Buildings and Building ImprovementsTo hold ownershipMortgaged to secure debt repayment with Kasikornbank Public Company Limited.126,056,598
1. 1-story permanent building, No. 53/1, Moo 4, Kanchanaphisek Road, Tambon Bang Mae Nang, Amphoe Bang Yai, Nonthaburi Province, Area 5,183 square meters. 2. 4-story permanent building, located on Title Deed No. 99181, No. 53/2, Moo 4, Tambon Bang Mae Nang, Amphoe Bang Yai, Nonthaburi Province, Area 1,874 square meters. 3. 1-story permanent building, No. 53/3, Moo 4, Kanchanaphisek Road, Tambon Bang Mae Nang, Amphoe Bang Yai, Nonthaburi Province, Area 2,520 square meters. 4. 3-story permanent building, located on Title Deed No. 99181, No. 53/2, Moo 4, Tambon Bang Mae Nang, Amphoe Bang Yai, Nonthaburi Province, Area 1,398 square meters. 5. 2-story permanent building, No. 53/1, Moo 4, Kanchanaphisek Road, Tambon Bang Mae Nang, Amphoe Bang Yai, Nonthaburi Province, Area 1,200 square meters. 6. 4-story permanent building, No. 53/1, Moo 4, Kanchanaphisek Road, Tambon Bang Mae Nang, Amphoe Bang Yai, Nonthaburi Province, Area 3,928 square meters. 7. Building extensions and other structures.
Machinery and EquipmentTo hold ownershipNo obligations55,580,933.27
Machinery and equipment, totaling 381 items.
Tools and EquipmentTo hold ownershipNo obligations2,837,814.54
Tools and equipment, totaling 517 items.
Office appliances and equipmentTo hold ownershipNo obligations1,150,813.56
Office supplies and equipment, totaling 653 items.
VehicleTo hold ownershipAuto Loans with TISCO Bank Public Company Limited and KASIKORN LEASING Company Limited4,067,735.97

Intangible Assets — Description

Computer software is an intangible asset used to support operations and internal management within the organization. The software held by the company has a total value of 2,222,550.36 Baht and covers various types of software used in different aspects of the business.

Intangible Assets — Appraisal

AssetTypeAppraisal ValueDescription
Computer SoftwareSoftware2,222,550.36
1. Express Software 2. Business Plus HRM Payroll Software 3. Microsoft Windows Operating System 4. Microsoft Office Software 5. SBC Software 6. Similan Software 7. Winspeed Software

Has Subsidiaries Investment Policy (Y/N)

No

Marketing Policy & Competition

Reporting Mode

3117

Marketing Policy (Overall)

Target Customer Groups, Distribution Channels, Products, and Brands. The Company operates as a manufacturer and distributor of food packaging products made from plastic and paper, with products divided into 3 main groups:

  1. Plastic Bag Product Group.

  2. Stretch Film for Food Wrapping Product Group.

  3. Paper packaging product group for food packaging.


Each product group is under the following brands:

  1. Plastic bags under the brand "Makruk and Makhos" (Chess and Checkers).

  • Hot bags (PP) – Used for packaging hot food.

  • Opaque bags (HDPE) – Used for general food packaging.

  • Cold bags (LLDPE) – Used for packaging cold food.

  • Premium handle bags (PP) – 0.5 kg pack, for luxurious and durable use.

  • Thin handle bags (HDPE) – Pack of 100 for general use.

  • Thick handle bags (HDPE) – 0.5 kg pack for packaging requiring durability.

  • Gusseted bags (PP) – Suitable for packaging products requiring more space.

  • Premium handle bags (LLDPE) – 0.5 kg pack, offering enhanced flexibility and aesthetic appeal.


  1. Stretch film for food wrapping (food preservation film) under the brand "Wow Wrap".

  • Food preservation film (PVC) – Used for wrapping food to maintain freshness and extend shelf life.


  1. Paper packaging for food under the brand "Beat Box".

  • Paper food boxes – Suitable for packaging ready-to-eat meals.

  • Paper food bowls – For packaging soups or dishes with gravy/sauce.


The Company primarily focuses on sales and market development within the domestic market. For domestic customers, the Company sells its products to its main customer group, the Traditional Trade market, which primarily consists of "Yee Pua" (wholesalers), "Sa Pua" (sub-wholesalers), retail shops, street vendors, and general restaurants. The Company's secondary customer group is the Modern Trade market, comprising chain restaurants, factories, and local department stores. The Company's focus on target customers and sales approach differs from other players in the market. The Company emphasizes market development and sales operations primarily through its own sales team. In comparison, other players may have their own sales teams for some operations and also sell through appointed distributors (both domestic and international sales). Regarding sales coverage, the Company's sales extend across all regions of Thailand. Most small and medium-sized players typically sell only within the provinces where their companies are located, with limited cross-regional sales. However, large players in the market also have nationwide sales coverage, similar to the Company.


For the Company's customer groups, the Company primarily focuses on "Yee Pua" (wholesalers), "Sa Pua" (sub-wholesalers), retail shops, and street vendors as its main customer base. Their purchasing patterns are relatively more fragmented compared to the main customer groups of other players in the same market. Other players in the same market tend to focus on selling to customers who purchase in larger quantities, such as primarily "Yee Pua" groups. However, the Company also sells its products to "Yee Pua" customers. Furthermore, some other players primarily focus on selling to Modern Trade customers, whereas the Company does not heavily emphasize sales to department stores, convenience stores, and Super/Hyper Markets. Therefore, the Company has distinct customer groups, product types, sales characteristics, and market development strategies compared to its competitors. For managing its main customer groups, the Company primarily focuses on developing customer relationships, prioritizing responsiveness to customer needs beyond general product sales, such as product returns, delivery to the customer's desired location, and other services as per customer requirements. Additionally, customer relationships are further developed through assisting and resolving various issues for customers in the local market.


Distribution Channels

The Company's primary distribution channel is through its own sales team. The Company possesses a broader customer base compared to other market players. Therefore, the Company's sales primarily focus on selling through "Yee Pua" (wholesalers) and "Sa Pua" (sub-wholesalers) in local markets. In addition to its regular sales operations, the Company has implemented an Omni-Channel sales and communication strategy by studying and developing additional online communication and distribution channels. Currently, sales are conducted on E-Commerce platforms to meet evolving customer demands. However, the majority of consumer behavior still favors purchasing the Company's products through offline channels. Consequently, the Company maintains its primary sales strategy through its existing sales channels.

Industry & Competition (Overall)

Overview and Trends of the Plastic Bag Packaging Industry

The plastic bag packaging industry in Thailand is an integral part of the packaging industry, directly linked to economic activities across various sectors, including manufacturing, trade, and services. This is particularly true for the food business, product delivery, and the distribution of daily consumer goods.


In terms of market value, the plastic packaging industry in Thailand has a total market size of approximately 550-600 billion baht per year. Disposable plastic bags account for about 20-25% of the total market, or approximately 110-150 billion baht per year. Currently, the overall industry fluctuates with domestic economic conditions and purchasing power, with a modest market growth rate and volatility influenced by external factors.


In recent times, measures and collaborations to reduce the use of single-use plastic bags, particularly in modern retail stores, have led to changes in plastic bag usage patterns. The volume of thin handle bags has decreased, while the use of certain types of plastic bags, such as bags for food packaging, bags for delivery services, and stronger bags, continues to exist in the economy due to their essential applications.


Consumer and corporate customer behavior has shifted towards greater emphasis on suitability for use and environmental responsibility. This necessitates that industry operators consider product design and operational processes to align with market demands and relevant regulations. Nevertheless, plastic bags continue to be a consistently chosen packaging option in many activities due to their ability to adequately meet needs concerning convenience, safety, and cost.


Regarding government policy, Thailand's waste and environmental management guidelines have become clearer, focusing on waste reduction and efficient resource utilization. This may impact the cost structure, product types, and business approaches of industry operators in the future. Therefore, operators must closely monitor the progress of relevant policies and regulations.


From a competitive perspective, the plastic bag industry continues to experience high competition, with price being a crucial factor in customer decision-making. This is coupled with product quality, consistency in delivery, and the ability to meet specific customer requirements, all of which play an increasingly important role in business operations within the current competitive environment.


In summary, the disposable plastic bag packaging industry in Thailand is undergoing a period of adaptation within continuously changing economic, social, and environmental contexts. Although the market growth trend is moderate, the industry still holds a significant market size and consistent usage across various sectors. Operators who can manage risks, control costs, and conduct business in compliance with legal frameworks and good governance principles will be prepared for sustained business operations in the long term.


Overview and Trends of the Paper Packaging Industry for Food in Thailand

The paper packaging industry for food in Thailand is a vital part of the packaging industry, playing a significant role in the food and beverage sector, as well as in services and consumer goods distribution. This category of packaging includes paper boxes and paper bowls for food, which are widely used in restaurants, beverage shops, food delivery businesses, and daily consumption activities.


In terms of market value, the paper packaging industry in Thailand has a total market size of approximately 55-60 billion baht per year. Paper packaging for food accounts for about 30-35% of the total market, or approximately 16-21 billion baht per year. The overall market fluctuates with domestic economic conditions and activities in the food and service sectors, with a moderate market growth rate.


Currently, the paper packaging industry for food is growing in line with changing consumption behaviors, particularly the expansion of restaurant businesses, food delivery services, and ready-to-eat meals. This has led to a continuous demand for paper boxes and paper bowls. The market growth rate over the next 2-3 years is expected to be approximately 3-4% per year, reflecting the growth of the food service sector rather than structural expansion of the industry.


Regarding consumer and corporate customer behavior, there is a growing trend to prioritize packaging with an appropriate image for the product, ease of use, and hygiene and safety in food packaging. Consequently, paper packaging has become an alternative in many businesses. However, the decision to choose packaging still considers factors such as cost, suitability for the type of food, and usage limitations concurrently.


Regarding government policy and environmental trends, the movement towards reducing single-use plastic packaging has led to increased interest in paper packaging in certain business segments. However, the industry continues to face challenges related to paper raw material costs, price volatility, and the necessity to develop products suitable for food applications, such as moisture and grease resistance, which may impact cost structures and selling prices.


From a competitive perspective, the paper packaging industry for food experiences high competition. Operators must manage costs while maintaining product quality, consistency in production, and the ability to deliver products according to customer requirements. These factors play a crucial role in the ability to sustain business operations within the current competitive environment.


In summary, the paper packaging industry for food in Thailand is operating under an environment of change influenced by economic conditions, consumer behavior, and environmental policies. Although the market growth trend is moderate, the industry still holds a significant market size and continuous usage. Operators who can control costs, manage risks, and conduct business in compliance with legal frameworks and good governance principles will be prepared for sustained business operations in the long term.


Industry Trends and Future Competitive Landscape

Competitive Landscape of the Plastic Bag Packaging Industry

Thailand's plastics industry experiences continuous competition, consistent with the industry's characteristic of numerous operators and many product groups serving similar applications. Consequently, price remains a key factor customers consider, especially for basic goods and general packaging.


In an economic environment where recovery is gradual, some operators have adjusted their pricing strategies to align with market conditions and customer demand, aiming to maintain business continuity. The fluctuating costs of raw materials and energy make prudent cost management increasingly important.


Under such competitive conditions, operators who can control costs, maintain product quality standards, and consistently deliver products will have a business advantage. Concurrently, service reliability and strong customer relationships, especially with corporate clients, remain factors that enhance long-term competitiveness.


Overall, the competitive landscape in the plastics industry reflects a market with competition driven by normal market mechanisms, requiring appropriate internal management. Operators who can adapt to market conditions and maintain business discipline will be prepared for continuous business operations within the evolving competitive context.


Competitive Landscape of the Paper Packaging Industry

The paper packaging industry in Thailand experiences continuous competition, consistent with a market structure comprising numerous operators, both large and medium-sized. Products in many categories have similar applications, especially packaging for food and general use. This necessitates that operators prioritize operational efficiency and the ability to meet customer demands.


In practice, the ability to maintain consistent product quality, production capacity readiness, and continuous product delivery are crucial factors influencing customer decisions, especially among corporate clients and food businesses, who prioritize manufacturer reliability and long-term supply stability.


Concurrently, the industry also faces limitations concerning raw material costs and production processes that require careful control, necessitating efficient internal management by operators to maintain continuous business operations within a changing competitive environment. Company Size Compared to Competitors: The following information presents a comparative overview of the company against its industry competitors, using indicators such as registered capital, assets, liabilities, shareholders' equity, revenue, and profit to reflect the overall nature and scale of business operations. The companies in this group are part of medium and large-sized enterprises operating similarly to the company. The purpose of presenting these details is for informational consideration and to highlight differences in business structures during the same period.

Registered Capital

Assets

Liabilities

Shareholders' Equity

Revenue

Profit

Sunee Plastic Industry Co., Ltd.

620.00

1,744.70

946.25

798.45

3,377.91

10.79

Maneemongkol Import-Export Co., Ltd.

150.00

1,097.96

854.15

240.81

1,012.38

17.42

Unique Plastic Industry Public Company Limited

330.00

1,942.3

1,545.41

396.96

2,582.99

104.47

Thai Nam Poly Pack Co., Ltd.

60.00

1,128.79

696.48

432.31

2,504.24

55.07

Lawanwisut Plastic Thai Co., Ltd.

9.00

308.19

122.04

186.15

731.94

4.20

Thai Plastic Industries (1994) Public Company Limited

135.00

356.23

43.29

312.95

451.27

7.95

Srisakul Plastic Limited Partnership

4.00

151.72

80.62

71.10

284.27

6.20


Competitive Status and Potential

The company primarily focuses on developing markets and products for plastic bag packaging, offering a diverse range of plastic bag products that cater to various customer needs. Additionally, the company has developed plastic film products for food wrapping and paper packaging for food to further strengthen its product portfolio. Currently, the company has added other related products in the food consumption category, such as plastic straws. Beyond the products the company has continuously developed, it has also continuously developed other services that can meet the needs of its customer base, such as sales and logistics processes that are responsive to customer demands. As a result, when compared overall within the industry, the company possesses a relatively high competitive potential and higher profitability compared to companies in the same industry.

Procurement of Products & Services

Reporting Mode

3117

Procurement (Overall)

Currently, the Company has 1 production plant located at 53/1 Moo 4, Kanchanaphisek Road, Bang Mae Nang Subdistrict, Bang Yai District, Nonthaburi Province, with a land area of 11 rai 2 ngan 24.8 square wah and a usable area of 7,703 square meters. As of December 31, 2025, the Company possesses machinery for producing 3 types of products, as follows:

  • Machinery for producing plastic bags consists of 64 plastic bag blowing machines and 57 plastic bag cutting machines. with a total production capacity of over 10,000 tons of plastic bags per year.

  • Machinery for producing stretch film for food packaging consists of 1 machine for producing stretch film for food packaging, with a total production capacity of over 840 tons per year.

  • Machinery for producing paper packaging consists of 10 machines for producing food packaging paper boxes, 3 machines for producing food packaging paper cups, and 1 paper printing machine, with a total production capacity of over 59 million pieces per year.

Raw Material Acquisition (Overall)

  • Plastic pellets for plastic bag production and plastic pellets for stretch film for food wrapping production. The Company's products are made from plastic pellets, which the Company can procure from manufacturers or distributors both domestically and, if necessary, imported from abroad. This is because the quality of such raw materials does not vary significantly, as they are commodity products. In the past, the Company has procured its main raw materials directly from domestic raw material manufacturers and from plastic pellet distributors, as the plastic pellets are of good quality and meet standard specifications. The Company specifies the quantity of plastic pellets to be used per month, which aligns with the established production plan. If the quantity of raw materials is insufficient for actual production, the Company will place additional orders on a case-by-case basis. However, the Company has not experienced any shortages of plastic pellets for production to date.

  • Paper for paper packaging production. The Company procures its main raw material, paper, used in paper packaging production from manufacturers or distributors in China and domestic manufacturers.

  • Other raw materials. The Company procures other raw materials used in production, such as additives. The Company sources suitable domestic suppliers and compares prices and quality, typically comparing 2-3 suppliers before making a purchasing decision.

Distributors (Overall)

  1. Plastic pellets for plastic bag products

Suppliers of plastic pellets for plastic bag production are typically large manufacturers or distributors with nationwide distribution networks. They usually possess the capability to continuously supply raw materials in the required quantities. As plastic pellet prices fluctuate significantly with oil prices, stable and reliable suppliers are crucial for ensuring sufficient raw material supply for production needs. Furthermore, consistent quality and properties that meet standards are essential to maintain product quality and production process efficiency.


The relationship with plastic pellet suppliers is a long-term and strategic one, as plastic pellets are a primary raw material required continuously and in large quantities. Entering into long-term contracts with key suppliers helps control costs and mitigate risks from market price fluctuations. Furthermore, maintaining good relationships with distributors ensures efficient procurement of materials in the required quantities and at the right time, leading to smooth production processes and preventing raw material shortages.


  1. Paper for paper products

Paper suppliers for paper products offer a variety of paper qualities and properties. Key suppliers are often manufacturers with modern, standardized production facilities, enabling them to produce paper with properties that meet product requirements. Additionally, paper suppliers with low production costs and consistent quality significantly help reduce manufacturing costs and enhance competitiveness. Therefore, supplier selection considers quality, price, and delivery stability.


The relationship with paper suppliers is a long-term and strategic one, aimed at ensuring continuous raw material supply and mitigating risks from price fluctuations. Building strong relationships with both domestic and international manufacturers allows for the selection of paper with properties that meet specific product standards and requirements. Furthermore, collaborative efforts are undertaken to improve paper properties, responding to market trends and consumer demands.


  1. Oil (ADDITIVE) for stretch film for food packaging

Suppliers of oil (additives) for stretch film for food packaging are specialists in a wide range of additive products, catering to the specific needs of the production process. Important suppliers are typically companies capable of providing high-quality additives with properties that comply with industry standards. Furthermore, they must ensure stable delivery and continuous supply of raw materials to avoid impacting the production process and product quality.


The relationship with oil (additive) suppliers is strategic and highly flexible, as various types of additives are used in production formulas, necessitating reliance on multiple suppliers. Close collaboration in developing formulas and additive properties helps improve product performance and respond to market demands. Furthermore, comparing quality and prices from multiple suppliers ensures the procurement of raw materials with appropriate quality and cost.


  1. Other production components

Other production components such as paper cores, calcium pellets, reinforcing agents, and printing inks are crucial for the production process and product quality. Key suppliers are often companies with expertise and understanding of the company's production processes, enabling them to supply materials that meet specific product standards and requirements. Furthermore, reliable suppliers with stable delivery help ensure smooth production processes and prevent raw material shortages.


Relationships with suppliers of other production components are typically long-term, as these materials are regularly used and crucial for manufacturing. Collaborating on material development and property improvement to meet evolving product requirements helps the company maintain product quality and stability. Furthermore, comparing prices from multiple suppliers ensures cost-effectiveness and maximum benefit for production.

Number of Raw-Material Distributors (Overall)

7

Production Capacity (Overall)

ItemUnitUsedCapacity
Plastic bagTon6610,000
Food Container/Paper CupPiece4059,000,000
Food wrapTon60840

Domestic/Overseas Purchase Proportion (Overall)

Raw MaterialSource CountryValue
Plastic pellets, Paper and OthersThailand253,990,868
PaperChina12,006,821.59
OthersSouth Korea4,941,427.41

Projects Under Construction

Has Projects Under Construction (Y/N)

No

Debentures & Bills of Exchange

Has Debentures (Y/N)

No

Convertible Securities

Has Convertible Securities (Y/N)

No

Contents